Scavenger Workshop

Files can be found here for a small donation to charity. Subscription grants access to all files or you can choose one time purchase for $10
https://www.patreon.com/c/ScavengerWorkshop


File 1 of 1
5052 H32 Aluminum (.187")
Scavenger-Hub-Drive-187.dxf







Parts List

4 X 3/8 in.-16 TPI Zinc Rod Coupling Nuts (2-Pack)
6 X 3/8 in.-16 x 4 in. Zinc Plated Hex Bolt
1 X 3/8 in. Zinc Flat Washer (8-Pack)
2 X Vex 3.25 Omni wheel
2 X Hub Drive with .5 drive shaft

I'm very interested to see how this goes together!

If your using the Scavenger Hub drives you still need the center wheel hub from the 2.0 hub files for R2 to be drivable.
I have extracted those parts here if your doing an order to make it easier:
Process: Sheet Cutting
Material: Aluminum 5052-H32
Material Thickness: 0.125in
Vex Robotics
2 qty 1.125" Bearing Pilot Plastic VersaHub (1/4" Wide, w/ Plate Sprocket Mount)
4 qty 4" Omni-Directional Wheel v2
4 qty 0.500" ID x 1.125" OD x 0.313" WD (Flanged Bearing) • $2.99 SKU#: 217-2731

(Updated guide on using the more easily available goBuild wheels is coming soon)

Home Depot
5 qty 3/8 in.
-16 x 4 in. Zinc Plated Hex Bolt
5 qty 3/8 in. nylon lock nuts

AluminumSpacer.com
4 qty Aluminum Spacer 1/2 OD x .382 ID x 3/4 Long
2 qty Aluminum Spacer 1/2 OD x .382 ID x 1-3/8 Long
2 qty Aluminum Spacer 1/2 OD x .382 ID x 1/8 Long
4 qty Aluminum Spacer 1/2 OD x .382 ID x 1-1/2 Long