Scavenger Workshop

Difficulty Level: Intermediate


Assembly Guide Build Of Materials
DFX Files if you want to order from your own waterjet place

This is rev 2 only for ampflo E30 150 motors!
File 1 of 1
Process: Sheet Cutting
Material: Aluminum 5052-H32
Material Thickness: 0.125in
Finish: Standard

This is the old rev 1 files with the scooter motor mount see below for wheel and sprocket replacement
File 1 of 1
Process: Sheet Cutting
Material: Aluminum 5052-H32
Material Thickness: 0.125in
Finish: Standard

Drive Parts

Instead of buying the Robotshop Colson wheel and the motor sprocket replace with below


Wheels are manufactured from Glass-filled Nylon. Each Traction Wheel comes assembled in 1” wide configuration and also includes all hardware for 1.5” and 2” wide configurations.


https://www.vexrobotics.com/traction-wheels.html
2 X 4" Traction Wheel • $7.99
3 X 4" Traction Tire (0.5" Wide, 2-pack) • $2.49



https://www.vexrobotics.com/25-sprockets.html
2 X 32T Aluminum Plate Sprocket (#25 Chain, 1-1/8" Bearing Bore) • $5.99



https://www.vexrobotics.com/versahubs.html
2 X 1.125” Bearing Bore Plastic VersaHub Spacer (1/2” Wide)

4 X https://a.co/d/hmJVkkK Single Split Clamp-On Shaft Collars of Metal Material 1/2 inch Bore Set Screw